Фрэнсис topic simple machines. Методическая разработка занятия по английскому языку на тему "Машины и работа" (3 курс)
How Simple Machines Work
What is a simple machine and how do they work? I"m so glad you asked! Machines make work easier by changing the size of force, direction of force, or distance the force acts on.
Lifting a car with a flat tire and loosening the lugnuts can be accomplished by a single person thanks to simple machines. The jack and lug wrench are simple machines that alter the force needed to change the tire.
Six Simple Machines
Simple machines are basic devices used to alter the force needed to accomplish a task. There are six types of simple machines.
- lever
- wheel and axle
- inclined plane
- wedge
- screw
- pulley
The first type of simple machine is the lever. A lever is a rigid bar that rotates on the fixed point of a fulcrum and changes the distance or size of a force.
There are three classes of levers. A first class lever has an input force and output force on either side of the fulcrum. This causes the output to move in the opposite direction of the the input force. An example of a first class lever is a see-saw. A second class lever has an output force between the input force and fulcrum. This changes the distance of the force. A wheelbarrow is a second class lever. The third class lever has the input force between the output and fulcrum. A broom is a third class lever.
Wheel and Axle
The wheel and axle make work easier by changing the distance the force acts on. A wheel and axle consists of two disks or
cylinders with different radiuses. Examples are a steering wheel and shaft, a car wheel and axle, and a screwdriver.
Inclined Plane
An inclined plane is a slanted surface on which a force can move an object to a different elevation. Why do gentler slopes and ramps require less energy to move a load on? Because the input force required to travel the greater distance of a slope is changed to the smaller distance of the output force – the upward motion.
A wedge is a device made of two back to back inclined planes and is used to split objects. When a wedge is driven into a log, the size of the input force at the wider top of the wedge is changed to greater output force at the narrower point forcing the wedge through the wood. Knife blades are an example of a wedge.
A screw is an inclined plane wrapped around a cylinder. Screws with threads closer together require
less force to turn because the length of the inclined plane is longer. Nuts and bolts are screws. A nut is a screw with the threads on the inside.
The last type of simple machine is the pulley. A pulley consists of a rope that fits into a groove in a wheel. A pulley makes work easier by changing the direction or direction and size of the force.
There are three types of pulleys . They are the fixed pulley, moveable pulley and pulley system.
The fixed pulley is a single fixed pulley and rope. This changes the output direction of the force, making it opposite of the input. When you pull down on a fixed pulley a weight is lifted up.
A moveable pulley is fixed to the object being moved instead of a fixed location. Moveable pulleys multiply the input force needed to lift a heavy object thus reducing the force needed to lift heavy objects. Moveable pulleys are used to move ship sails and window washer platforms.
Pulley systems combine fixed and moveable pulleys to create large mechanical advantages. A crane uses pulley systems to lift enormous loads like locomotives.
References
- Michael Wysession, David Frank, Sophia Yancopoulos. Physical Science Concepts in Action. p.417 – 435. New Jersey: Prentice Hall, 2004.
Simple machines can be used to make work easier and faster. Compound machines are basically simple machines placed together to work together. Work is force acting on an object that moves it a distance (W=F*d). A simple machine must have some force applied to it to do work. Simple machines let us use a small force to beat bigger forces. They can also change the direction of the force. Keep in mind that a simple machine cannot create energy (F input * d input = F output * d output). If you want the force output to be big and distance output to be small, you need to have a big distance input and a small force input. If you want the force output to be small and the distance output to be large, then the force input needs to be large and the distance input to be small (Fd = Fd). There are three simple machines will be focus on for this project: lever, pulley, and wheel and axle. .
The lever is used in seesaws, shovels, hammers, and other everyday objects. A lever consists of three main parts: the fulcrum, rod, and the load the machine is acting on it. The fulcrum, or fixed point, allows the rod to move up and down freely. There are three classes of levers, but for this project a will be using the second-class lever. This lever allows us to use less force to act on the load. In other words, less force and more distance will be inputted to result in more force and less distance. This kind of lever in usually used to move heavy objects. The fulcrum is closer to the load to achieve this. This simple machine will probably be the best to lift the soda can. Most of the lever can be built out of wood. The fulcrum may be made out of metal or wood. .
The pulley is used in cranes. Pulleys usually lift the load. A pulley changes the direction in the force to do that. A pulley is used to change the direction of the force. It can also multiply forces depending on the type. In this project a type one and two pulley will be used.
Essays Related to Simple Machines
1.
Technology and machines have become more advanced we have grown accustomed to having machines such as computers and cars in our everyday lives. Our own machines will soon surpass our own intelligence. ... Machines have played a vital role in our lives. ... When they were first created a computer that had the power of one of today"s simple five dollar calculators required so much space to hold all of their necessary equipment it could take up a whole room, but the simple machine known today can be made so small it can not even be handled by a human due to its s...
- Word Count: 1272
- Approx Pages: 5
- Grade Level: High School
2.
AI is the attempt to make machines, specifically computers, perform intelligently through programming. ... It could be said that the human brain is nothing more than a machine, and as we know it to be capable of thought it would be fair to surmise that therefore machines can think and it is probably this, or a similar premise that inspired AI. ... This argument is an attempt to demonstrate that although a computer program appears to be understanding a story, it is merely obeying simple instructions, and has no understanding at all. ... But what are these natural causal properties, and from ...
- Word Count: 1323
- Approx Pages: 5
- Has Bibliography
3.
In The Time Machine by H.G Wells, Wells portrays the future to an exact detail. ... The Eloi are simple and beautiful creatures, but the Time Traveler thinks of them as weak and lazy. ... Through the Time Machine Wells warns that mankind will come to end if capitalism continues. ... Social Darwinism and evolution are presented throughout the Time Machine. ... Well"s uses the Time Machine to project what he believes the future will be. ...
- Word Count: 1454
- Approx Pages: 6
- Grade Level: High School
4.
Rage Against The Machine At first thought a band standing on stage naked for 15 minutes without saying a word or playing a single note might seem lewd, but after finding that they were silently protesting censorship one might think differently of them. Rage Against the Machine (RATM) is probably one of the most atypical bands that one could ever find. ... Believe it or not there are bands who care less about money and more about issues and Rage Against the Machine is one of them. ... The majority of their songs were primarily written as activist poetry by Zack de la Rocha (lead singer ...
- Word Count: 519
- Approx Pages: 2
5.
ABSTRACT Complex system theory in animals and machines is well developed and a basic synopsis is provided. ... These ideas have been applied in the field of Engineering to develop machines for controlling states of objects or events: a simple temperature control system is used as a model. ... This process, is the modern basis of the modern theory regarding the evolution of life, which in simple terms can be described as the process of prolonging a type of structure through; duplication, reproduction or other processes. ... A basic comparison of control systems in nature and machines can b...
- Word Count: 908
- Approx Pages: 4
- Has Bibliography
- Grade Level: Undergraduate
6.
Personally thinking, technology makes people"s life simpler than making people"s lives more complicated because newly developed devices, improvement of living condition and efficient transportation. ... All of those technologies can help people get a simpler and easier lives. ... Thus, technology has more benefits can be discovered, and it make lives simpler rather than more complicated. In conclusion, although technology may be a little bit complicated, when we count it use on machines, communication, information, and transportation, it is more pure and effortless for our lives. ...
- Word Count: 787
- Approx Pages: 3
- Has Bibliography
- Grade Level: Undergraduate
7.
A simple distinction between both groups is that humans depend on organization where as animals do not. The Time Machine by H.G. ... Unlike the Eloi, the Morlocks have a curiosity for knowledge which is why they take the time machine. ... When the time machine is returned to him, he notices that it is very clean and well oiled. ... Wells illustrates this quite well in The Time Machine. ...
HanicalSimple Machines and its Mechanical Advantage What are Simple Machines ? What do we mean by Mechanical Advantage? Simple Machines * creates a greater output force than the input force Therefore since work is performed by applying a force over a distance, with the use of these machines we can do more work with lesser effort than working with our bare hands. In short, they make work easier. Mechanical Advantage * The Ratio between the input force and the output force. * The measure of the force amplification achieved by using a tool, mechanical device or machine system. Anyway what is input and output force? Input refers to the force you applied while output refers to the resultant force the object has from the input force. Example: I pushed a ball with 10 N of force, it is rolling with 10 N of force. I input 10 N into it, now it is outputting 10 N. The Six Classical Simple Machines The Lever(French word that means “to raise”) * A simple machine that allows you to gain a mechanical advantage in moving an object or in applying a force to an object. It is considered a "pure" simple machine because friction is not a factor to overcome, as in other simple machines . Part | Description | Fulcrum | Is where a solid board or rod can pivot...
Simple Machines Examples With Pictures Essay
Applied Force Other First Class Lever Examples Applied Force Action Force Spring Load Force Action http://library.thinkquest.org/J002079F/lever.htm Third Class Lever Effort or Applied Force Egg ready to be launched Release hook Compressed Spring Load or Resistance Fulcrum Applied force can be in any direction http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /sciber/lever3.htm http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /images/tweezer.gif http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /images/base.jpg Inclined Plane An inclined plane is a slanted surface used to raise an object. An inclined plane decreases the size of the effort force needed to move an object. However, the distance through which the effort force is applied is increased. The Big Rock rolling downhill with gravitational force IS NOT an example of an inclined plane. The inclined plane gives you mechanical advantage AGAINST gravity. Big Rock http://www.sirinet.net/~jgjohnso/simple.html An example of how an Inclined Plane can be used to raise a mass to activate another simple machine Egg ready to be launched By First Class Lever F Big Rock Force pushing (or pulling) Big Rock up the hill Inclined Plane First Class Lever Wedges Pulleys Wedges are moving inclined planes that are driven under loads to lift Pulleys use a wheel or set of wheels around which a single length (not...
Activity 1.1.2 Simple Machines Practice Problems Answer Key Essay
Activity 1.1.2 Simple Machines Practice Problems Answer Key Procedure Answer the following questions regarding simple machine systems. Each question requires proper illustration and annotation, including labeling of forces, distances, direction, and unknown values. Illustrations should consist of basic simple machine functional sketches rather than realistic pictorials. Be sure to document all solution steps and proper units. All problem calculations should assume ideal conditions and no friction loss. Simple Machines – Lever A first class lever in static equilibrium has a 50lb resistance force and 15lb effort force. The lever’s effort force is located 4 ft from the fulcrum. 1. Sketch and annotate the lever system described above. 2. What is the actual mechanical advantage of the system? Formula Substitute / Solve Final Answer AMA = 3.33 3. Using static equilibrium calculations, calculate the length from the fulcrum to the resistance force. Formula Substitute / Solve Final Answer A wheel barrow is used to lift a 200 lb load. The length from the wheel axle to the center of the load is 2 ft. The length from the wheel and axle to the effort is 5 ft. 4. Illustrate and annotate the lever system described above. 5. What is the ideal mechanical advantage of the system?...
Compound Machine
Our compound machine , consisting of mainly three different simple machines , is a crane designed to multiply your force in order to effectively and efficiently lift the four 75 kg up a steep hill. Our machine starts off with the gear train. As you rotate the handle, all the gears rotate along as well. Since we connected the rope of the pulley to our gears, it then puts the pulley system into action. We created movable pulleys throughout the arm until the tip to stabilize our rope and also give us a mechanical advantage. At the top section of our arm we created a lever to support the load. This magnifies our effort force since a combination of all the mechanical energy is being carried out. With the pulley system, connected all the way to the gear train, and the lever working all together, our mechanical advantage is increased greatly. We created a series of gear trains to not only increase our advantage of torque in the machine but also to increase the mechanical advantage rather than losing efficiency due to friction and thermal energy. Doing this, we magnified our effort force onto the load. Also, in the gears, we arranged it so that the input gear and the output gear gave us a low gear ratio and the idler gears in between. It also allows us to control the direction of our force in the machine . Since it is linked to the pulley, we can control the direction of the rope. However, it only...
Essay
SAMPLE PROBLEMS: . Simple Machines – Lever A first class lever in static equilibrium has a 50lb resistance force and 15lb effort force. The lever’s effort force is located 4 ft from the fulcrum. Sketch and annotate the lever system described above. | What is the actual mechanical advantage of the system? Formula | Substitute / Solve | Final Answer | | | AMA = 3.33 | * Using static equilibrium calculations, calculate the length from the fulcrum to the resistance force. Formula | Substitute / Solve | Final Answer | | | | A wheel barrow is used to lift a 200 lb load. The length from the wheel axle to the center of the load is 2 ft. The length from the wheel and axle to the effort is 5 ft. Illustrate and annotate the lever system described above. | What is the ideal mechanical advantage of the system? Formula | Substitute / Solve | Final Answer | | | | * Using static equilibrium calculations, calculate the effort force needed to overcome the resistance force in the system. Formula | Substitute / Solve | Final Answer | | | | A medical technician uses a pair of four inch long tweezers to remove a wood sliver from a patient. The technician is applying 1 lb of squeezing force to the tweezers. If more than 1/5 lb of force is applied to the sliver, it will break and become difficult to remove. Sketch and annotate the lever system...
Essay on Simple Machines
...Simple machines are extremely important to everyday life. They make stuff that is normally difficult a piece of cake. There are several types of simple machines . The first simple machine is a lever. A lever consists of a fulcrum, load, and effort force. A fulcrum is the support. The placing of the fulcrum changes the amount of force and distance it will take in order to move an object. The load is the applied force. The effort force is the force applied on the opposite side of the load. Levers can be placed in three classes. The 1st class levers are objects like pliers where the fulcrum is at the center of the lever. The 2nd class of levers are objects that have the fulcrum on the opposite side of the applied force like a nutcracker. The 3rd and final class is objects like crab claws. These objects of the load at one end and the fulcrum on the other. An inclined plane is another simple machine . Inclined planes are also known as ramps. Ramps make a trade off between distance and force. No matter how steep the ramp, the work is still the same. A winding road on a mountain side is a good example of a ramp. Some simple machines are modified inclined planes. The wedge is one of those machines . One or two inclined planes make up a wedge. Saws, knives,needles, and axes are made from wedges....
Simple Machines Essay
...Simple Machines Definitions: Machine - A device that makes work easier by changing the speed , direction, or amount of a force. Simple Machine - A device that performs work with only one movement. Simple machines include lever, wheel and axle, inclined plane, screw, and wedge. Ideal Mechanical Advantage (IMA)- A machine in which work in equals work out; such a machine would be frictionless and a 100% efficient IMA= De/Dr Actual Mechanical Advantage (AMA)- It is pretty much the opposite of IMA meaning it is not 100% efficient and it has friction. AMA= Fr/Fe Efficiency- The amount of work put into a machine compared to how much useful work is put out by the machine ; always between 0% and 100%. Friction- The force that resist motion between two surfaces that are touching each other. What do we use machines for? Machines are used for many things. Machines are used in everyday life just to make things easier. You use many machines in a day that you might take for granted. For example a simple ordinary broom is a machine . It is a form of a lever. Our country or world would never be this evolved if it wasn"t for machine . Almost every thing we do has a machine involved. We use machines ...
Simple Machine A machine with few Essay
... Simple Machine : A machine with few or no moving parts. Simple machines make work easier. Examples: Screw, Wheel and Axle, Wedge, Pulley, Inclined Plane, Lever Compound Machine : Two or more simple machines working together to make work easier. Examples: Wheelbarrow, Can Opener, Bicycle Inclined plane: A sloping surface, such as a ramp. Makes lifting heavy loads easier. The trade-off is that an object must be moved a longer distance than if it was lifted straight up, but less force is needed. Examples: Staircase, Ramp Lever: A straight rod or board that pivots on a point known as a fulcrum. Pushing down on one end of a lever results in the upward motion of the opposite end of the fulcrum. Examples: Door on Hinges, Seesaw, Hammer, Bottle Opener Pulley: A wheel that usually has a groove around the outside edge for a rope or belt. Pulling down on the rope can lift an object attached to the rope. Work is made easier because pulling down on the rope is made easier due to gravity. Examples: Flag Pole, Crane, Mini-Blinds Screw: An inclined plane wrapped around a shaft or cylinder. This inclined plane allows the screw to move itself or to move an object or material surrounding it when rotated. Examples: Bolt, Spiral Staircase Wedge: Two inclined planes joined back to back. Wedges are used to split things....
Simple machines are tools that make work easier. They have few or no moving parts.These machines use energy to work. There are six types of simple machines . The six types of simple machines are used in our daily life. Simple machines convert a smaller amount of force exerted over a larger distance to a greater amount of force exerted over a shorter distance, or vice versa. The concept of simple machine was introduced by the Greek philosopher Archimedes the 3rd century.
There are six types of simple machines. The six types of simple machines are
- Wedge
- Lever.
Pulley is wheels and axles with a groove around the outside
A pulley needs a rope, chain or belt around the groove to make it do work
Examples: Flag post, Elevator, Window blinds, Crane, Winch.
A screw is an inclined plane wrapped around a shaft or cylinder.
The inclined plane allows the screw to move itself when rotated
Examples: Screw lid jar, drills, door lock, meat grinder, brace and bits,
3) Wedge:
A wedge is used to split an object through the application of force. It is made up of two inclined planes which meet to form a sharp edge. Wedges are used to split things.
Examples: Knives, axe. Forks, pin, chisels.
An inclined plane is a flat surface that is higher on one end, which makes it easier to move heavy objects to a certain height.
Examples: Roller coaster, stirs, sloping roads, ramps, boat propeller,
The wheel and axle is made up of two circular objects. The wheel is the larger object which turns around the smaller object the axle. The axle is a rod that goes through the wheel which allows the wheel to turn,
Examples: Door knobs, Egg beater, Steering wheels, door knobs, pencil sharpener. Gears are a form of wheels and axles
6) Lever:
This is a is a bar rests on a turning point. The turning point is the fulcrum. An object the lever moves is the load. There are three kinds of levers, First order, Second order and third order.
In a first class lever the fulcrum is in the middle and the load and effort is on either side.
Example: see saw
In a second class lever the fulcrum is at the end, with the load in the Middle.
Example: wheelbarrow
In a third class lever the fulcrum is again at the end, but the effort is in the middle.
Example:
Pair of tweezers.
Advantage of using the six simple machines:
These six simple machines are used in day to day life. They make the work easier for us. Simple machines are being used hundreds of years before. Even the great pyramids were build by using the simple machines. The inclined plane was used to move heavy stones for building the pyramids. Different combinations of these six simple machines can be used in the building of complex machines.
Sub Topics
The effort is the force applied to the machine.
The load is the force against which the machine does the work.
This ratio is a measure of the advantage that one obtains by using the machine. If a load of 40 N is moved by applying an effort of 10 N on the machine then the mechanical advantage of the machine is given by
Velocity Ratio (V.R)
The "corresponding distance" is the distance moved by the load in the same time as the distance moved by the effort.
The velocity ratio depends only on the design of the machine and is always same for a particular machine. The mechanical advantage on the other hand can vary for a particular machine as it depends on friction.
M.A., V.R. and efficiency have no units as they are ratios between similar quantities.
Effort: The force applied to the machine.
Load: The force against which the machine does the work.
Since the effort does the work on the machine and the load is worked upon by the machine, efficiency can also be expressed as
The efficiency is very often expressed as a percentage i.e.,
It should be noted that 100% efficiency is possible only for an ideal (imaginary) machine. Usually, for all practical purposes the efficiency of a machine is always less than 100%. This is because practical M.A. is always less than theoretical M.A. due to friction and the weight of the moving parts.
YouTube Encyclopedic
1 / 5
Views:Simple Machines for Kids: Science and Engineering for Children - FreeSchool
Science - Simple machine (Screw, wedge and lever) - Hindi
Simple Machines (Song and lyrics)
Simple Machines Types & Functions Kindergarten,Preschoolers,Kids
Super Simple Machines: Levers
Transcription
You"re watching FreeSchool! Hi everyone! Today we"re going to talk about simple machines. A simple machine is a device that makes work easier by magnifying or changing the direction of a force. That means that simple machines allow someone to do the same work with less effort! Simple machines have been known since prehistoric times and were used to help build the amazing structures left behind by ancient cultures. The Greek philosopher Archimedes identified three simple machines more than 2,000 years ago: the lever, the pulley, and the screw. He discovered that a lever would create a mechanical advantage, which means that using a lever would allow a person to move something that would normally be too heavy for them to shift. Archimedes said that with a long enough lever and a place to rest it, a person could move the world. Over the next few centuries more simple machines were recognized but it was less than 450 years ago that the last of the simple machines, the inclined plane, was identified. There are six types of simple machines: the Lever, the Wheel and Axle, the Pulley, the Inclined plane, the Wedge, and the Screw. Pulleys and Wheel and Axles are both a type of Lever. Wedges and Screws are both types of Inclined Planes. Each type of Simple Machine has a specific purpose and way they help do work. When speaking of simple machines, "work" means using energy to move an object across a distance. The further you have to move the object, the more energy it takes to move it. Let"s see how each type of simple machine helps do work. A LEVER is a tool like a bar or rod that sits and turns on a fixed support called a fulcrum. When you use a lever, you apply a small force over a long distance, and the lever converts it to a larger force over a shorter distance. Some examples of levers are seesaws, crowbars, and tweezers. A Wheel and Axle is easy to recognize. It consists of a wheel with a rod in the middle. You probably already know that it"s easier to move something heavy if you can put it in something with wheels, but you might not know why. For one thing, using wheels reduces the friction - or resistance between surfaces - between the load and the ground. Secondly, much like the lever, a smaller force applied to the rim of the wheel is converted to a larger force traveling a smaller distance at the axle. Wheel and axles are used for machines such as cars, bicycles, and scooters, but they are also used in other ways, like doorknobs and pencil sharpeners. A Pulley is a machine that uses a wheel with a rope wrapped around it. The wheel often has a groove in it, which the rope fits into. One end of the rope goes around the load, and the other end is where you apply the force. Pulleys can be used to move loads or change the direction of the force you are using, and help make work easier by allowing you to spread a weaker force out along a longer path to accomplish a job. By linking multiple pulleys together, you can do the same job with even less force, because you are applying the force along a much longer distance. Pulleys may be used to raise and lower flags, blinds, or sails, and are used to help raise and lower elevators. An Inclined Plane is a flat surface with one end higher than the other. Inclined planes allow loads to slide up to a higher level instead of being lifted, which allows the work to be accomplished with a smaller force spread over a longer distance. You may recognize an inclined plane as the simple machine used in ramps and slides. A Wedge is simply two inclined planes placed back to back. It is used to push two objects apart. A smaller force applied to the back of the wedge is converted to a greater force in a small area at the tip of the wedge. Examples of wedges are axes, knives, and chisels. A Screw is basically an inclined plane wrapped around a pole. Screws can be used to hold things together or to lift things. Just like the inclined plane, the longer the path the force takes, the less force is required to do the work. Screws with more threads take less force to do a job since the force has to travel a longer distance. Examples of screws are screws, nuts, bolts, jar lids, and lightbulbs. These six simple machines can be combined to form compound or complex machines, and are considered by some to be the foundation of all machinery. For example, a wheelbarrow is made of levers combined with a wheel and axle. A pair of scissors is another complex machine: the two blades are wedges, but they are connected by a lever that allows them to come together and cut. We use simple machines to help us do work every day. Every time you open a door or a bottle, cut up your food, or even just climb stairs, you are using simple machines. Take a look and see if you can identify the simple machines around you and figure out how they make it easier to do work.
Contents
History
The idea of a simple machine originated with the Greek philosopher Archimedes around the 3rd century BC, who studied the Archimedean simple machines: lever, pulley, and screw . He discovered the principle of mechanical advantage in the lever. Archimedes" famous remark with regard to the lever: "Give me a place to stand on, and I will move the Earth." (Greek : δῶς μοι πᾶ στῶ καὶ τὰν γᾶν κινάσω ) expresses his realization that there was no limit to the amount of force amplification that could be achieved by using mechanical advantage. Later Greek philosophers defined the classic five simple machines (excluding the inclined plane) and were able to roughly calculate their mechanical advantage. For example, Heron of Alexandria (ca. 10–75 AD) in his work Mechanics lists five mechanisms that can "set a load in motion"; lever , windlass , pulley , wedge , and screw , and describes their fabrication and uses. However the Greeks" understanding was limited to the statics of simple machines; the balance of forces, and did not include dynamics ; the tradeoff between force and distance, or the concept of work .
Frictionless analysis
Although each machine works differently mechanically, the way they function is similar mathematically. In each machine, a force F in {\displaystyle F_{\text{in}}\,} is applied to the device at one point, and it does work moving a load, F out {\displaystyle F_{\text{out}}\,} at another point. Although some machines only change the direction of the force, such as a stationary pulley, most machines multiply the magnitude of the force by a factor, the mechanical advantage
M A = F out / F in {\displaystyle \mathrm {MA} =F_{\text{out}}/F_{\text{in}}\,}that can be calculated from the machine"s geometry and friction.
The mechanical advantage can be greater or less than one:
- The most common example is a screw. In most screws, applying torque to the shaft can cause it to turn, moving the shaft linearly to do work against a load, but no amount of axial load force against the shaft will cause it to turn backwards.
- In an inclined plane, a load can be pulled up the plane by a sideways input force, but if the plane is not too steep and there is enough friction between load and plane, when the input force is removed the load will remain motionless and will not slide down the plane, regardless of its weight.
- A wedge can be driven into a block of wood by force on the end, such as from hitting it with a sledge hammer, forcing the sides apart, but no amount of compression force from the wood walls will cause it to pop back out of the block.
A machine will be self-locking if and only if its efficiency η is below 50%:
η ≡ F o u t / F i n d i n / d o u t < 0.50 {\displaystyle \eta \equiv {\frac {F_{out}/F_{in}}{d_{in}/d_{out}}}<0.50\,}Whether a machine is self-locking depends on both the friction forces (coefficient of static friction) between its parts, and the distance ratio d in /d out (ideal mechanical advantage). If both the friction and ideal mechanical advantage are high enough, it will self-lock.
Proof
When a machine moves in the forward direction from point 1 to point 2, with the input force doing work on a load force, from conservation of energy the input work W 1,2 {\displaystyle W_{\text{1,2}}\,} is equal to the sum of the work done on the load force W load {\displaystyle W_{\text{load}}\,} and the work lost to friction
W 1,2 = W load + W fric (1) {\displaystyle W_{\text{1,2}}=W_{\text{load}}+W_{\text{fric}}\qquad \qquad (1)\,}If the efficiency is below 50% η = W load / W 1,2 < 1 / 2 {\displaystyle \eta =W_{\text{load}}/W_{\text{1,2}}<1/2\,}
2 W load < W 1,2 {\displaystyle 2W_{\text{load}}When the machine moves backward from point 2 to point 1 with the load force doing work on the input force, the work lost to friction W fric {\displaystyle W_{\text{fric}}\,} is the same
W load = W 2,1 + W fric {\displaystyle W_{\text{load}}=W_{\text{2,1}}+W_{\text{fric}}\,}So the output work is
W 2,1 = W load − W fric < 0 {\displaystyle W_{\text{2,1}}=W_{\text{load}}-W_{\text{fric}}<0\,}Thus the machine self-locks, because the work dissipated in friction is greater than the work done by the load force moving it backwards even with no input force
Modern machine theory
Kinematic chains
Classification of machines
The identification of simple machines arises from a desire for a systematic method to invent new machines. Therefore, an important concern is how simple machines are combined to make more complex machines. One approach is to attach simple machines in series to obtain compound machines.
However, a more successful strategy was identified by Franz Reuleaux , who collected and studied over 800 elementary machines. He realized that a lever, pulley, and wheel and axle are in essence the same device: a body rotating about a hinge. Similarly, an inclined plane, wedge, and screw are a block sliding on a flat surface.
This realization shows that it is the joints, or the connections that provide movement, that are the primary elements of a machine. Starting with four types of joints, the revolute joint , sliding joint , cam joint and gear joint , and related connections such as cables and belts, it is possible to understand a machine as an assembly of solid parts that connect these joints.
See also
References
- Chambers, Ephraim (1728), "Table of Mechanicks", Cyclopædia, A Useful Dictionary of Arts and Sciences , London, England, Volume 2, p. 528, Plate 11 .
- Paul, Akshoy; Roy, Pijush; Mukherjee, Sanchayan (2005), Mechanical sciences: engineering mechanics and strength of materials , Prentice Hall of India, p. 215, ISBN .
- ^ Asimov, Isaac (1988), Understanding Physics , New York, New York, USA: Barnes & Noble, p. 88, ISBN .
- Anderson, William Ballantyne (1914). Physics for Technical Students: Mechanics and Heat . New York, USA: McGraw Hill. pp. 112–122. Retrieved 2008-05-11 .
- ^ Compound machines , University of Virginia Physics Department, retrieved 2010-06-11 .
- ^ Usher, Abbott Payson (1988). A History of Mechanical Inventions . USA: Courier Dover Publications. p. 98. ISBN .
- Wallenstein, Andrew (June 2002). . Proceedings of the 9th Annual Workshop on the Design, Specification, and Verification of Interactive Systems . Springer. p. 136. Retrieved 2008-05-21 .
- ^ Prater, Edward L. (1994), Basic machines (PDF) , U.S. Navy Naval Education and Training Professional Development and Technology Center, NAVEDTRA 14037.
- U.S. Navy Bureau of Naval Personnel (1971), Basic machines and how they work (PDF) , Dover Publications.
- Reuleaux, F. (1963) , The kinematics of machinery (translated and annotated by A.B.W. Kennedy) , New York, New York, USA: reprinted by Dover.
- Cornell University , Reuleaux Collection of Mechanisms and Machines at Cornell University , Cornell University.
- ^ Chiu, Y. C. (2010), An introduction to the History of Project Management , Delft: Eburon Academic Publishers, p. 42,